Firmware update Yaesu FT710 AESS

Alles over zend(ontvang)ers en toebehoren.
Plaats reactie
Bericht
Auteur
PE9E
Berichten: 77
Lid geworden op: 13 jan 2013, 14:15
Roepletters: PE9E
Locatie: JO32BC

Firmware update Yaesu FT710 AESS

#1 Bericht door PE9E »

Er is een firmware update uitgekomen van de Yaesu FT710 AESS.
https://www.yaesu.com/indexVS.cfm?cmd=D ... Archived=0

Voor de bestanden even kijken bij "Files".

Implements improvements:
1. AESS settings can now be saved for each mode.
2. Improved DNR characteristics.
3. Changed the MENU notation of CW WAVE SHAPE.
4. Fixed a bug that MIC EQ was enabled in DATA mode.
5. Fixed a bug that some items were not reflected when calling QMB.
6. Fixed a bug that the band stack was not memorized properly when the power was
turned OFF.
7. Fixed a bug that the cursor position was not memorized in CURSOR mode.
8. Fixed the problem that the icon may be lost when the power is restarted with TUNER
ON.
9. Improvement to permit shifting to PMS with the CAT command.
10. The repeater shift frequency is reflected in the FA and FB commands.
11. Fixed a bug that CAT-AI was not output when operating PRESET items.
12. Fixed a bug in the operation of the EX command "TUN/LIN PORT SELECT".
13. Fixed the problem that the response was not performed normally when CAT
commands were received continuously.
14. Other improvements and optimizations have been made.

PE9E
Berichten: 77
Lid geworden op: 13 jan 2013, 14:15
Roepletters: PE9E
Locatie: JO32BC

Re: Firmware update Yaesu FT710 AESS

#2 Bericht door PE9E »

Ik heb deze update zelf inmiddels geinstalleerd en is voor zover ik kan zien zonder problemen verlopen. :D
Verder moet ik nog even ontdekken of de verbeteringen echt werken.

Gebruikersavatar
Thijzer
Berichten: 1392
Lid geworden op: 25 feb 2011, 10:25

Re: Firmware update Yaesu FT710 AESS

#3 Bericht door Thijzer »

Dat zijn een hoop bugs voor een eerste release... Had Yaesu haast?

PE9E
Berichten: 77
Lid geworden op: 13 jan 2013, 14:15
Roepletters: PE9E
Locatie: JO32BC

Re: Firmware update Yaesu FT710 AESS

#4 Bericht door PE9E »

Een paar dagen geleden is een nieuwe update uitgekomen.

• MAIN: V01-10 /FT-710_MAIN_V0110.SFL
• DISPLAY: V01-08 /FT-710_DISPLAY_V0108.SFL

Implements improvements:
1. Supports wheel operation of USB mouse.
2. Fixed bugs in the CAT command.
3. Other improvements and optimizations have been made.

Ik heb deze geprobeerd en het werkt vwb de muis.
De overige verbeteringen heb ik nog niet kunnen testen.
Eerst de MAIN en daarna het DISPLAY installeren. Anders resulteert zich dit in een foutmelding.

Plaats reactie