wfview 1.0 released: icom open source remote control
- pa3met
- Berichten: 1489
- Lid geworden op: 21 apr 2006, 19:09
- Roepletters: PA3MET
- Locatie: IJsselstein
- Contacteer:
wfview 1.0 released: icom open source remote control
Hi Friends,
It is my pleasure to announce that the wfview team has completed our first official release of wfview.
wfview is software for controlling modern Icom receivers and transceivers, using either USB or network for the audio and control. This release of wfview is designed to support the following radios:
IC-9700
IC-R8600 (preliminary)
IC-7850/7851
IC-7610
IC-7300
IC-705
wfview provides the user with data from the radio's spectrum display. The main tab contains all the basic features most users will need for a QSO or casual listening. Other tabs contain convenient buttons for jumping to various bands or adjusting more detailed parameters of the radio, including the calibration control adjustment on the IC-9700, which can be used in tandem with the waterfall display.
wfview goes beyond simply allowing the user to adjust the radio. wfview enhances the user's experience, with easy-to-use keystrokes for most tasks and accessibility labels for screen readers. The software even includes a built-in rig server, primarily designed for the IC-7300, which allows other instances of wfview on remote computers to connect in and enjoy fast real-time control and low-latency audio.
wfview supports Linux, Windows, and macOS, and is fully open-source.
Useful links:
Homepage: https://wfview.org/
User Manual: https://wfview.org/wfview-user-manual/
Support Forum: https://forum.wfview.org/
Download: https://wfview.org/download/
Source: https://gitlab.com/eliggett/wfview
The wfview team wishes to thank all those that contributed test reports and questions about our early releases made over the past month. You've been quite helpful!
Future plans include:
Greater support for the IC-R8600
Handy overlays on the spectrum display (frequency markers, passband, etc)
More support for older radios
Improved audio
Additional metering options
Support for dual VFO and dual-scope options
Join our support forum if you wish to follow our progress and learn from the many interesting posts from other users.
Thanks and 73!
--the wfview development team:
Elliot W6EL
Jim PA8E
Phil M0VSE
Roeland PA3MET
It is my pleasure to announce that the wfview team has completed our first official release of wfview.
wfview is software for controlling modern Icom receivers and transceivers, using either USB or network for the audio and control. This release of wfview is designed to support the following radios:
IC-9700
IC-R8600 (preliminary)
IC-7850/7851
IC-7610
IC-7300
IC-705
wfview provides the user with data from the radio's spectrum display. The main tab contains all the basic features most users will need for a QSO or casual listening. Other tabs contain convenient buttons for jumping to various bands or adjusting more detailed parameters of the radio, including the calibration control adjustment on the IC-9700, which can be used in tandem with the waterfall display.
wfview goes beyond simply allowing the user to adjust the radio. wfview enhances the user's experience, with easy-to-use keystrokes for most tasks and accessibility labels for screen readers. The software even includes a built-in rig server, primarily designed for the IC-7300, which allows other instances of wfview on remote computers to connect in and enjoy fast real-time control and low-latency audio.
wfview supports Linux, Windows, and macOS, and is fully open-source.
Useful links:
Homepage: https://wfview.org/
User Manual: https://wfview.org/wfview-user-manual/
Support Forum: https://forum.wfview.org/
Download: https://wfview.org/download/
Source: https://gitlab.com/eliggett/wfview
The wfview team wishes to thank all those that contributed test reports and questions about our early releases made over the past month. You've been quite helpful!
Future plans include:
Greater support for the IC-R8600
Handy overlays on the spectrum display (frequency markers, passband, etc)
More support for older radios
Improved audio
Additional metering options
Support for dual VFO and dual-scope options
Join our support forum if you wish to follow our progress and learn from the many interesting posts from other users.
Thanks and 73!
--the wfview development team:
Elliot W6EL
Jim PA8E
Phil M0VSE
Roeland PA3MET
IC7851; IC202S; TH-F7E; MD380; IC7000(+4m); IC7300; IC9700, IC705, X6100
- PE4BAS
- Berichten: 961
- Lid geworden op: 25 dec 2005, 23:30
- Roepletters: PE4BAS
- Locatie: Roodeschool
- Contacteer:
Re: wfview 1.0 released: icom open source remote control
Interessant, daar ga ik eens mee experimenteren...bedankt voor de info.
Re: wfview 1.0 released: icom open source remote control
Dit weekend eens geinstalleerd en tot mijn verbazing werkte het via WiFi wel en kreeg ik het via USB niet aan de gang.
Maar het werkt prima, mooi grote scope en goede verversing. Remote control is niet heel super maar daar was ik ook niet naar op zoek.
Maar het werkt prima, mooi grote scope en goede verversing. Remote control is niet heel super maar daar was ik ook niet naar op zoek.
- pa3met
- Berichten: 1489
- Lid geworden op: 21 apr 2006, 19:09
- Roepletters: PA3MET
- Locatie: IJsselstein
- Contacteer:
Re: wfview 1.0 released: icom open source remote control
als je de usb (/dev/ttyACMx in het geval van linux/705) gebruikt dan zal de scope speed in elkaar storten.
Als je lan/wifi hebt is dat de beste keus.
remote control: de roadmap is groot en we hebben het in een stuk of drie... vier brokken nu gemaakt.
Binnenkort meer informatie daar over wat de gerdachten zijn voor de volgende release (test-releases zijn er ook)
Roeland
Als je lan/wifi hebt is dat de beste keus.
remote control: de roadmap is groot en we hebben het in een stuk of drie... vier brokken nu gemaakt.
Binnenkort meer informatie daar over wat de gerdachten zijn voor de volgende release (test-releases zijn er ook)
Roeland
IC7851; IC202S; TH-F7E; MD380; IC7000(+4m); IC7300; IC9700, IC705, X6100
- PA3DAT
- Berichten: 6274
- Lid geworden op: 21 sep 2008, 08:08
- Roepletters: PA3DAT
- Locatie: Kampen
- Contacteer:
Re: wfview 1.0 released: icom open source remote control
Ik heb de Windows-versie gedownload van de website, uitgepakt en een snelkoppeling gemaakt naar de desktop.
Hij start echter niet op, omdat ie twee bestanden mist: MSVCP140.dll en VCRUNTIME140.dll.
Ik zal eens kijken of ik die ergens kan downloaden, of ben ik nu verkeerd bezig?
Dat is gelukt, die 2 dll-bestanden staan in dezelfde map. Nu krijg ik een andere foutmelding:
Hij start echter niet op, omdat ie twee bestanden mist: MSVCP140.dll en VCRUNTIME140.dll.
Ik zal eens kijken of ik die ergens kan downloaden, of ben ik nu verkeerd bezig?
Dat is gelukt, die 2 dll-bestanden staan in dezelfde map. Nu krijg ik een andere foutmelding:
Nu maar even wachten op goede ideeën!Toepassingsfout
Kan de toepassing niet correct starten (0x000007b). Klik op
OK om de toepassing te sluiten.
73 de Aloys PA3DAT / PA6D / 5P4W / KE2CZI
Re: wfview 1.0 released: icom open source remote control
Op de een of andere manier downloadt hij niet alles of pakt hij het niet netjes uit. Ik heb een paar keer geprobeerd voordat ik een map had met een aantal files en een aantal mappen. Volgens mij zit er geen installer tussen maar draait het direct als .exe .
De eerste keer pakte hij maar 2 bestanden uit en kreeg ik ook die foutmeldingen.
Dus ik ben er niet achter wat het geweest is, alleen werkt het nu wel. Virusscanner misschien? I dunno. Kwestie van wat "fiddelen" en proberen denk ik.
Misschien heb je er wat aan...
De eerste keer pakte hij maar 2 bestanden uit en kreeg ik ook die foutmeldingen.
Dus ik ben er niet achter wat het geweest is, alleen werkt het nu wel. Virusscanner misschien? I dunno. Kwestie van wat "fiddelen" en proberen denk ik.
Misschien heb je er wat aan...
- PA3DAT
- Berichten: 6274
- Lid geworden op: 21 sep 2008, 08:08
- Roepletters: PA3DAT
- Locatie: Kampen
- Contacteer:
Re: wfview 1.0 released: icom open source remote control
Ik had maar één bestand na uitpakken: het programma zelf. Maar ik zit nu in de installatie-fase!
Op de website staat:
Op de website staat:
Bij mij zat die dus niet in de download, weer een stapje verder. Het programma start nu wél op!The Windows build requires the latest Microsoft Visual C++ Runtime (x86) which is included in the download
but is also available from: https://aka.ms/vs/16/release/vc_redist.x86.exe
73 de Aloys PA3DAT / PA6D / 5P4W / KE2CZI
- pa3met
- Berichten: 1489
- Lid geworden op: 21 apr 2006, 19:09
- Roepletters: PA3MET
- Locatie: IJsselstein
- Contacteer:
Re: wfview 1.0 released: icom open source remote control
er staat nog voldoende op de list om te fixen/toe te voegen om die experience fijner te maken.
IC7851; IC202S; TH-F7E; MD380; IC7000(+4m); IC7300; IC9700, IC705, X6100
- itsme123
- Berichten: 110
- Lid geworden op: 22 sep 2011, 18:56
- Roepletters: PE1NIB
- Locatie: Wijchen
- Contacteer:
Re: wfview 1.0 released: icom open source remote control
Intussen is 1.2a versie te downloaden voor alle platformen.
(Draait hier inmiddels al, geen problemen tot nu toe bemerkt)
(Draait hier inmiddels al, geen problemen tot nu toe bemerkt)