IC-9700 Firmware V1.30

Alles over zend(ontvang)ers en toebehoren.
Plaats reactie
Bericht
Auteur
Gebruikersavatar
PE2AAB
Moderator
Berichten: 7089
Lid geworden op: 12 apr 2005, 19:06
Roepletters: PE2AAB
Locatie: Aalst - Waalre
Contacteer:

IC-9700 Firmware V1.30

#1 Bericht door PE2AAB »

IC-9700 Firmware V1.30 has just been released.

The download and release notes are on the Icom Japan website, along with a release document.
This is quite a big one.

Link: https://www.icomjapan.com/support/firmware_driver/3251
Scroll naar beneden, ga akkoord met de Terms & Conditions en click op download.
'73 Rick, PE2AAB www.pe2aab.nl

Gebruikersavatar
PE2AAB
Moderator
Berichten: 7089
Lid geworden op: 12 apr 2005, 19:06
Roepletters: PE2AAB
Locatie: Aalst - Waalre
Contacteer:

Re: IC-9700 Firmware V1.30

#2 Bericht door PE2AAB »

Verschil met de vorige versie:
Changes from Version 1.24

[Spectrum scope is improved]
- A Scroll mode that can seamlessly change the displaying scope range, depending on the operating frequency, is added.
- A popup screen that displays when SPAN or EDGE change is added.
- The number of FIX EDGE memories is expanded to 4.
- Each band independently memorizes the Reference level.
- Improved the Scope function of the RS-BA1.


[Preset function is added for FT8 operation]
-A Preset function that can set each operation is added.


[Other changes]
- A Front Key Customization function that can change the function of [VOX/BK-IN], [AUTOTUNE/AFC], and [TONE/RX>CS] is added.
- A MIC Key Customization function that can change the function of [UP] and [DOWN] is added.
- A Touch function is added to the GPS icon.
- The "ddd.dddd°" format is added for the Latitude/Longitude display.
- While operating in the Data mode, the receive tone control is deactivated.
- A menu item that can return to the normal mode is added to the QUICK MENU of Terminal Mode and Access Point Mode.
- Fixed an issue where the time may not be displayed in the GPS POSITION screen.
Meer info; download de PDF hier: https://www.icomjapan.com/support/manual/2160/
'73 Rick, PE2AAB www.pe2aab.nl

Gebruikersavatar
PE2AAB
Moderator
Berichten: 7089
Lid geworden op: 12 apr 2005, 19:06
Roepletters: PE2AAB
Locatie: Aalst - Waalre
Contacteer:

Re: IC-9700 Firmware V1.30

#3 Bericht door PE2AAB »

En de update naar versie 1.30 is een feit!
20210226_210209.png
20210226_210209.png (23.53 KiB) 2970 keer bekeken
'73 Rick, PE2AAB www.pe2aab.nl

Gebruikersavatar
PE2AAB
Moderator
Berichten: 7089
Lid geworden op: 12 apr 2005, 19:06
Roepletters: PE2AAB
Locatie: Aalst - Waalre
Contacteer:

Re: IC-9700 Firmware V1.30

#4 Bericht door PE2AAB »

Wellicht nog als tip; de 'Yes' knop moet je iets langer ingedrukt houden. Dit is vermoedelijk gedaan ter voorkoming van abusievelijk aantikken.
Afbeelding

Hoewel ik me afvraag; als je al zo ver bent in de update acties dan lijkt het me vreemd om dit als vergissing te doen ;-)
'73 Rick, PE2AAB www.pe2aab.nl

Plaats reactie