EasyDRF-experiment bij Shortwave Radiogram

Alles over de diverse digitale modi.
Bericht
Auteur
Gebruikersavatar
PA0ETE
Berichten: 5689
Lid geworden op: 21 feb 2006, 00:59
Roepletters: PA0ETE
Locatie: Amersfoort
Contacteer:

EasyDRF-experiment bij Shortwave Radiogram

#1 Bericht door PA0ETE »

Tussen 11 en 16 mei doet Kim Elliott in zijn kortegolfuitzending (op omroepfrequenties) een aantal expermenten met EasyDRF. Deze mode is een verdere ontwikkeling van HamDRM. Ik heb gesproken met de maker van EasyDRF en er is met name een irritatie van mij persoonlijk verholpen in EasyDRF: net als bij de meeste digitale mode's kun je een document of afbeelding alleen ontvangen als je de header van de uitzending foutloos hebt ontvangen. Bij SSTV kun je bijv. op ieder moment de ontvangst starten. Dat laatste kan met EasyDRF ook.

EasyDRF is een verdere ontwikkeling op basis van HamDRM, dat zelf weer op de schouders staat van een aantal andere initiatieven. De mode is afgeleid van de kortegolfomroepmode voor audio, DRM (Digital Radio Mondiale). Programma's als WinDRM en HamDRM behoren tot de snelste manieren om foutloos data via de kortegolf over te brengen.

Kortom, interessant genoeg om eens mee te experimenteren (en zeker als je geïnteresseerd bent in data-uitzendingen op de kortegolf).

Hieronder een bericht dat Kim Elliott hierover stuurde. De informatie staat nog niet op zijn website (die hier te vinden is: https://swradiogram.net/ )

Kim Elliott is een voormalig medewerker van VOA (Voice Of America). Hij deed daar jarenlang een uitzending waarin hij nieuws via digitale data (m.n. MFSK32) uitzond. Nadat hij bij de zender vertrok is hij het programma in eigen beheer blijven doen via ingehuurde zendtijd op meerdere kortegolfstations. (Op één van die zenders WRMI ben ik zelf ook wekelijks met een kort item over onze hobby te horen).

Als je meer diepgravende technische info over EasyDRF wilt, dan kun je de maker ervan zelf mailen via het mailadres in de tekst hieronder, maar ik kan je ook met de maker in contact brengen. (mailadres x@xdv.me , omdat ik op zoveel platforms zit lees ik geen PB's op zendamateur.com)


Hello friends
I am sending this preview of program 304 (11-16 May 2023) a few days early to give you time to download, install, and practice decoding the EasyDRF we will be using.
EasyDRF is a version of HamDRM which can be decoded using software developed by Daz Man in Australia.

Program 304 is a repeat of Shortwave Radiogram 300, but in EasyDRF. Details of program 300 are here.
https://swradiogram.net/post/7145235096 ... 23-program
.
The EasyDRF software works in Windows and under Wine in Linux. See Daz's downloading and operating instructions below.

The sound is different from MFSK. Easy DRF is more of a constant buzz. Shortly after the buzz starts, the file SWRG-300-00.html will appear in the Rx Files subfolder. Open that html file and watch the images populate it, one by one, during the half hour – reception permitting!

If you want to practice decoding EasyDRF before actual radio reception, the audio file is available here:
https://storage.googleapis.com/dazman/m ... C-EQ12.wav
.
Important: If you decode from the downloaded audio file, delete or move the files from the Rx Files subfolder before decoding from actual radio reception.
Questions about EasyDRF can be addressed to Daz via Twitter: @DazDude4000, or email: dazdude@hotmail.com

Here are Daz’s instructions to install and use EasyDRF:

This EasyDRF version of Shortwave Radiogram program 300 can only be decoded with the EasyDRF Windows application program.
SOFTWARE
Website: http://homepages.ihug.com.au/~daz2002/tech/EasyDRF/
.
Installation: Download the executable file from the GitHub release directory. Create a new folder on the PC hard drive named "EasyDRF", and move the downloaded "EasyDRF.exe" file to it. That's all. (Do not create the installation folder in "Downloads", as this can cause security issues.)

AUDIO
Feed the audio into your PC the same way as for normal Radiogram broadcasts.
Options are: VB-Cable (SDRs), line input or microphone (analog radios).

NOTE: If using SDR# (SDRSharp), disable "antifading" as it can severely degrade data signals.

After installation into its own folder, start EasyDRF by double-clicking on the EasyDRF.exe file and select the correct input device in the Soundcard -> RX Input menu setting.

Check audio level using the Display -> Input Level menu setting. Adjust the receiver audio level to be near mid-scale on the Input Level graph. If the graph turns red, the level is too high.

Set the Waterfall display under Display -> Waterfall menu setting. Signals and noise from the receiver should appear on the waterfall display.

It's a good idea to make a recording of the broadcast in case of decoding problems.

AM-Sync demodulation is recommended, to reduce carrier fade distortion that can severely degrade data decoding.
.
DISPLAY
This Shortwave Radiogram program consists of a series of files, sent using EasyDRF. The entire program is intended for web browser display, for easy viewing. The HTML file is sent first. When the HTML file saves, open a new web browser window. Click the "RxFiles" button on EasyDRF to open the file save folder, then drag and drop the "SWRG-300-00.html" file into the web browser to display it. (You can also right-click on the "SWRG-300-00.html" file, then “Open with” browser of choice.)

The HTML page will open, and it will display stats on the received files in the top right corner. The page can be browsed while the files are still decoding.

Please include the stats in your reports (a screenshot), as the image quality does not change with radio conditions.

The images will automatically load into the page as they progressively decode and save. Automatic image loading stops after image 12 is loaded, or after 30 minutes. Images are enhanced for display using a custom SVG filter.

In most cases, only 51% of good data is needed for each file, due to RS4 error correction. If any files fail to decode, some images will be missing from the page.

Thanks for decoding the Shortwave Radiogram program 300 EasyDRF special broadcast!
Please send reception reports reports, as usual, to radiogram@verizon.net. Or report them to Twitter @SWRadiogram
PS: Despite recent errors in the transmission schedule included in these emails, the schedule below is correct...
.
Shortwave Radiogram Transmission Schedule
UTC Day UTC Time Frequency Transmitter
Thursday 2330-2400 9265 kHz WINB Pennsylvania
Friday 0530-0600 7780 kHz WRMI Florida
Friday 1300-1330 15770 kHz WRMI Florida
Friday 1400-1430 15735 kHz DRM WINB Pennsylvania
Saturday 0230-0300 9265 kHz WINB Pennsylvania
Saturday 2300-2330 7570 kHz WRMI Florida
Monday 0800-0830 5850 kHz WRMI Florida
Tuesday 1430-1500 9955 kHz WRMI Florida
Ik ben niet via PB's bereikbaar. Mailadres is x@xdv.me

Plaats reactie