Gisteren kreeg ik ook al deze link toegespeeld:
https://medium.com/@rxseger/crystal-osc ... 6ea0bac2f9
Hier staat ook de gebruiksaanwijzing ter download maar die heeft mij ook nog niet verder gebracht.
Zelfbouw kristallen tester oscilleert niet alle kristallen.
-
- Berichten: 346
- Lid geworden op: 22 jan 2011, 17:19
- Roepletters: DK1NL
- Locatie: Selfkant - Tüddern (D)
- Contacteer:
Re: Zelfbouw kristallen tester oscilleert niet alle kristall
73 Marcel DK1NL
QRZ: https://www.qrz.com/db/DK1NL
QRZ: https://www.qrz.com/db/DK1NL
Re: Zelfbouw kristallen tester oscilleert niet alle kristall
Nog wat aanvullingen op de DL4YHF Frequency Counter:
Firmware mod door TheHWcave:
https://github.com/TheHWcave/PIC-freq.c ... dification
https://www.youtube.com/watch?v=8rOCmhPWLWw
Werkt hier goed.
Voor het kristal test functie kun je 2x 22pF C in een female header steken om ze snel te kunnen wisselen. Om 4MHz kristallen te testen plaats 50pF, voor 100kHz 150 pF
3D geprinte behuizing en front:
https://www.zl2pd.com/files/5_digit_counter_box.zip
https://www.zl2pd.com/img/XtalTestCount ... _Panel.jpg
Firmware mod door TheHWcave:
https://github.com/TheHWcave/PIC-freq.c ... dification
https://www.youtube.com/watch?v=8rOCmhPWLWw
Werkt hier goed.
Voor het kristal test functie kun je 2x 22pF C in een female header steken om ze snel te kunnen wisselen. Om 4MHz kristallen te testen plaats 50pF, voor 100kHz 150 pF
3D geprinte behuizing en front:
https://www.zl2pd.com/files/5_digit_counter_box.zip
https://www.zl2pd.com/img/XtalTestCount ... _Panel.jpg
Re: Zelfbouw kristallen tester oscilleert niet alle kristall
https://github.com/TheHWcave/PIC-freq.c ... dification
The new firmware has improved resolution in the range below 100 Hz and adds RPM (revolutions per minute) as display option. But it has lost the offset programmability of this version. So the new version is not a replacement. Both versions remain useful depending on your intended usage of the counter.
The new firmware has improved resolution in the range below 100 Hz and adds RPM (revolutions per minute) as display option. But it has lost the offset programmability of this version. So the new version is not a replacement. Both versions remain useful depending on your intended usage of the counter.