Shared Apex Loop rx antenne

Alles over antennes en toebehoren.
Bericht
Auteur
EA5JEX
Berichten: 1471
Lid geworden op: 14 nov 2007, 18:56
Roepletters: pa5cw
Locatie: Pedralba Valencia Spanje

Re: Shared Apex Loop rx antenne

#16 Bericht door EA5JEX »

Indeed very sensitive for metal objects. How is the performance Thierry?

Kees

Thierry
Berichten: 8
Lid geworden op: 29 nov 2017, 09:14

Re: Shared Apex Loop rx antenne

#17 Bericht door Thierry »

pa5cw schreef:Indeed very sensitive for metal objects. How is the performance Thierry?

Kees
Hello
Well, the Arduino system provokes me a lot of qrm by the microcontroller clock, I need to place ferrites on the power side of the arduino to establish shock self.
Meanwhile my wife offered me the original version SAL 30 MKII for my Christmas
The antenna is currently mounted next to the antenna K9AY
On the performance side the SAL 30 MKII has better directivity performance than the K9AY antenna.
I will resume the study of my project with the arduino a little later

Thierry
Berichten: 8
Lid geworden op: 29 nov 2017, 09:14

Re: Shared Apex Loop rx antenne

#18 Bericht door Thierry »

At the bottom of my land

Shared SAL-30 MKII antenna Array Solutions
K9AY antenna Array solutions
Bijlagen
20180211_111612[1].jpg
20180211_111535[1].jpg
20180211_111443[1].jpg

EA5JEX
Berichten: 1471
Lid geworden op: 14 nov 2007, 18:56
Roepletters: pa5cw
Locatie: Pedralba Valencia Spanje

Re: Shared Apex Loop rx antenne

#19 Bericht door EA5JEX »

Hi Thierry,

I rebuild my antenna, because I had some rust problems with the connectors.

I have made the salp20 mkII, it works now very good, also less qrm in daytime on low bands.

Ho is your arduino project?

73 Kees PA5CW

Plaats reactie