wijzigen GPS destination DMR Brandmeister

Alles over de diverse digitale modi.
Plaats reactie
Bericht
Auteur
Gebruikersavatar
PC1L
Berichten: 1396
Lid geworden op: 14 okt 2007, 17:02
Roepletters: PC1L
Contacteer:

wijzigen GPS destination DMR Brandmeister

#1 Bericht door PC1L »

Daar was dit te lezen :

GPS 5057 destination Rudy PD0ZRY

On the 1st of march we will phase out the GPS destination 5057. If this is the destination ID you are currently using in your codeplug, please update it as soon as possible using the instructions below.

You will need to replace the GPS destination with the first 3 digits of any active BrandMeister Master Server ID (ie: 204 for Netherlands, 208 for France, 310 for USA, etc.) followed by 999. For example the following destinations are valid for GPS destinations: 204999 (because there are masters 2041 and 2042), 208999 (because there is a 2082 master), 310999 (because there are masters 3101,3012, 3103, 3108), etc.

The first 3 digits of the GPS destination does not have to match those of the BrandMeister master server where your repeater or hotspot is connected to. For example, you can use GPS destination ID 208999 even if the repeater you use is connected to master 2042.

How to choose the GPS destination ID for your codeplug ? If the country where you operate has a BrandMeister server, the most logical choice is to use the first 3 digit of your country’s master ID and add 999 (for example 262999 if you are in Germany). If your country doesn’t have a master server, use the first digits of the one closest from your location.

Vraagje : kan men in de codeplug CPS 2017 v1.17 de GPS destination 5057 wijzigen / veranderen naar 204999 ? Of is dit uberhaupt niet noodzakelijk voor de gegeven configuratie ?

Helemaal onderaan ( GPS system ) onder destaination ID is alleen NONE en contact1 te vinden.

Is het daarom dat APRS niet werkt momenteel ?

Dank voor antwoord,

Leon PC1L.

PA3CQJ
Berichten: 75
Lid geworden op: 03 feb 2014, 20:30
Roepletters: PA3CQJ
Contacteer:

Re: wijzigen GPS destination DMR Brandmeister

#2 Bericht door PA3CQJ »

Als je alleen non en contact 1 ziet, heb je geen codeplug ingeladen.
Laad een codeplug en je kunt elk contact kiezen
Rutger
PA3CQJ

Gebruikersavatar
PC1L
Berichten: 1396
Lid geworden op: 14 okt 2007, 17:02
Roepletters: PC1L
Contacteer:

Re: wijzigen GPS destination DMR Brandmeister

#3 Bericht door PC1L »

Bedankt voor antwoord, Rutger. Klopt, had een defaultwaarde op de PC gezien. Excuus voor het foutje :mrgreen:. Gelijk een nieuwe halen hi .. maar weet jij of ik kan nog steeds CPS 2017 v1.17 gebruiken voor die in de porto te zetten ?

Ja, en dan neem ik aan dat ik ook die nieuwe codes daar kan invullen, als je dat nog even laat weten is het weer compleet allemaal hier :lol:.

Of is het misschien helemaal niet nodig om deze nieuwe codes ( zoals boven omschreven ) te gebruiken ?

Plaats reactie