Reflash router: hoe stop ik uboot van autobooting
Geplaatst: 22 mar 2020, 16:41
Gisteren foutieve flash van dd-wrt en poging terug naar stock tp-link tl-wr1043nd v1.
Dus vandag kastje open en serial interface eraan gesoldeerd.
Heb verbinding via putty en zie onderstaande output. Echter daarna hangt eea en dat is niet ok.
Vraag is dus: hoe stop ik deze autoboot zodat ik met wat commando's en tftp de hele zaak opnieuw kan flashen.
wie kan me helpen?
Dus vandag kastje open en serial interface eraan gesoldeerd.
Heb verbinding via putty en zie onderstaande output. Echter daarna hangt eea en dat is niet ok.
Vraag is dus: hoe stop ik deze autoboot zodat ik met wat commando's en tftp de hele zaak opnieuw kan flashen.
Code: Selecteer alles
U-Boot 1.1.4 (Apr 28 2013 - 16:01:02)
AP83 (ar9100) U-boot 0.0.11
DRAM:
sri
32 MB
id read 0x100000ff
flash size 8MB, sector count = 128
Flash: 8 MB
Using default environment
In: serial
Out: serial
Err: serial
Net: ag7100_enet_initialize...
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
eth0
Autobooting in 1 seconds## Booting image at bf020000 ...
Uncompressing Kernel Image ...
wie kan me helpen?